High Quality SMO 254 Sheets & Plates Worldwide
ASTM A240 UNS S31254 is an austenitic type of steel however it has greater strength when compared to other austenitic steels. They also offer good weldability and workability. These sheets are said to have higher strength and material due to which it is difficult to machine these 254 SMO Steel Plates. Cold reduction is the only process by which these plates can be hardened. They offer low magnetic permeability and are used in aircraft construction. SMO 254 Plates are available in the size range of 3 mm to 100 mm and the thickness of 0.3 mm to 120 mm. These plates offer high ductility and good impact strength.
ASTM A240 UNS S31254 Sheet is used in seawater, pulp mill bleach plants, brackish water, and chloride process streams. It is one of the most economical and cost effective sheets when compared to other sheets made up of different materials. UNS S31254 Plate has a melting range of 1320 degrees C to 1390 degrees C along with a density of 8 g/cm3. The process to cold work 6mo Plate is tough due to the high work hardening rate. However conventional methods can be used to cold work these plates. 1.4547 Plate is used food processing equipment, saltwater handling desalination, bleaching equipment, and chemical processing equipment.
SMO 254 S31254 Sheets and Plates Specifications
| Specifications | ASTM A240 / ASME SA240 |
| Thickness | 4mm-100mm |
| Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Surface | 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hairline, sandblast, Brush, etching, etc |
| Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange), etc. |
SMO 254 Sheets and Plates Chemical Composition
| Grade | SMO 254 |
|---|---|
| Ni | 17.5 – 18.5 |
| Cr | 19.5 – 20.5 |
| Mo | 6 – 6.5 |
| Cu | 0.5 – 1.0 |
| N | 0.18 – 0.22 |
| C | 0.02 |
| Mn | 1.0 |
| Si | 0.08 |
| P | 0.03 |
| S | 0.01 |
SMO 254 S31254 Sheets and Plates Mechanical Properties
| Grade | SMO 254 |
|---|---|
| Density | 8.0 g/cm3 |
| Melting Point | 1320-1390 °C |
| Yield Strength (0.2%Offset) | 300 |
| Tensile Strength | 650 |
| Elongation | 35 % |
We are manufacturer and supplier of Long Radius Bends, Butt-weld Fittings, Forged Fittings, Outlets, Flanges, Fasteners, Pipes, Tubes, Sheets, Plates and Coils, Bars and Wires in materials like SMO254, Duplex, Super Duplex, Aluminum, Titanium, Authentic Steel, Ferrite Steel, Nickel alloys, Non Ferrous Metals, etc. Many factors combine to achieve the success of a trading business i.e. the right product mix, a broad knowledge of products & their applications, good business relationships, logistics & financials expertise, proximity to the customer and last but not the least the appropriate range of support service.
- Best in the industry for stainless steel and alloys
- We maintain a large stock of our products to provide a perennial supply of goods
- We aim to provide Quality product at competitive prices to our customer
- Customer oriented products and excellent support
We produces variety of SMO 254 products as per your business need. Just send us your requirements and we will provide every information you need.
Yes we supply our product outside of India. Delivery is depend upon logistics and other factors. Please mention your country and delivery location while putting enquiry.
We manufactors and exports variety of products other than SMO. You can check our catelog from our main website catelog.
We only produce high quality products. If you found any compromisation in the quality of your received product then please reach our to us we will help you to get better.